Filament Easy PET-G Pure TR 1,75 mm 0,85 kg Fiberlogy
Filament Easy PET-G Pure TR 1,75 mm 0,85 kg Fiberlogy
23,19€ incl. VAT
18,70€ excl. VAT
Muljetavaldav lihtsus
EASY PET-G filament on huvitav pakkumine neile, kes otsivad 3D-printimise lihtsuse kombinatsiooni funktsionaalsete ja esteetiliste väärtustega. Glükooli lisamisega rikastatud PET tagab suure vastupidavuse mehaanilistele, keemilistele ja atmosfäärilistele teguritele ning selle kõrge amorfia koos väga hea voolavusega võimaldab saada suurema läbipaistvuse ja parema kihtide sidumisega väljatrükke.
EASY PET-G filamendiga trükkimisele on iseloomulik, et puuduvad klassikalise PET-G-ga töötamisel esinevad puudused: nöörimine, villimine ja filamendi kõrvetamine. Uhmatavate efektide saavutamine on sama lihtne kui EASY PLA-filamendiga igal 3D-printeril.
Eespool nimetatud omadused teevad EASY PET-G-st suurepärase kombinatsiooni traditsioonilise PET-G tugevusest ja EASY PLA lihtsusest ja prognoositavusest, mida 3D-printeri kasutajad nii kõrgelt hindavad.
EASY PET-G suurusega 1,75 mm on saadaval läbipaistva ja läbipaistmatu versioonina ning laias värvivalikus. Eredad värvid ja valguspeegeldused annavad trükitud elementidele atraktiivse välimuse, mis sobib suurepäraselt dekoratiivsete elementide, elektroonikakomponentide korpuste ning igasuguste mahutite ja kaunistuste valmistamiseks.
RAKENDAMINE 3D-TRÜKKIMISEL:
LÕPUPIDAMISOSAD: mahutid, hoidikud
PROTOTÜÜÜSID: pudelid, pakendid
ELEKTRONIKA: kaaned, korpused, dioodi sisaldavad tooted
KAUNISTUSED: lambid, klaasi meenutavad elemendid
KULUMÄRKID: sõrmused, kaelakeed, käevõrud.
Omadused:
trükkimise lihtsus
kõrge vastupidavus
vähene vastuvõtlikkus kokkutõmbumisele ja hõõrumisele
Järgmised parameetrid on ainult soovituslikud trükiseadistused selle materjali jaoks. Parima trükikvaliteedi tagamiseks tuleb valida konkreetsele printerile ja trükitingimustele sobivad seaded.
Düüsi temperatuur
220-250°C
Aluse temperatuur
90°C
Suletud kamber
ei ole vajalik
Ventilaator
0-25%
Vooluhulk
95-105%
Trükkimise kiirus
< 100 mm/s
Pind
maskeerimislint
Tagasitõmbamine (otsene)
2-3 mm
Tagasitõmbumine (bowden)
3-5 mm
Tagasitõmbumise kiirus
20-45 mm/s
Kuivatustingimused
60°C / 4h
Märkused
Tugeva kleepuvuse tõttu alusele ei ole soovitatav printida otse selle pinnale või klaasile. See võib põhjustada kahjustusi. Soovitame kasutada maskeerivat teipi.
Kirjeldus on tõlgitud automaatse tõlke abil. Kui märkate mingeid erinevusi, palun teavitage meid e-posti teel kirjeldused@lemona.ee.
Impressive simplicity
The EASY PET-G filament is an interesting proposition for those looking for a combination of the ease of 3D printing with functional and aesthetic values. PET enriched with the addition of glycol ensures high resistance to mechanical, chemical and atmospheric factors, and its high amorphy combined with a very good flow allows obtaining prints with greater transparency and better layer bonding.
Printing with the EASY PET-G filament is characterized by the absence of the deficiencies of working with the classic PET-G: stringing, blistering and filament burning. Achieving stunning effects is as easy as with the EASY PLA filament on any 3D printer.
The above properties make EASY PET-G an excellent combination of the strength of the traditional PET-G and the simplicity and predictability of EASY PLA, so appreciated by 3D printer users.
EASY PET-G size 1.75 mm is available in a transparent and non-transparent version in a wide range of colors. The vivid colors and reflections of light give the printed elements an attractive appearance that is perfectly suitable for the production of decorative elements, housings for electronic components and all kinds of containers and ornaments.
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
Nozzle Temperature
220-250°C
Bed Temperature
90°C
Closed chamber
not required
Fan
0-25%
Flowrate
95-105%
Printing Speed
< 100 mm/s
Surface
masking tape
Retraction (direct)
2-3 mm
Retraction (bowden)
3-5 mm
Retraction Speed
20-45 mm/s
Drying conditions
60°C / 4h
Notes
Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.
This product has multiple variants. The options may be chosen on the product page
Cookie consent
To provide the best user experience, we use technologies such as cookies to store and/or access device information. Consenting to these technologies allows us to process data such as browsing behavior or unique IDs on this site. Failure to provide consent or withdrawal of consent may adversely affect certain features and functionality.
Functional
Always active
Technical storage or access is absolutely necessary to enable the use of a specific service explicitly requested by the subscriber or user or for the sole purpose of transmitting communication via an electronic communication network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
Technical storage or access is necessary to create user profiles to send advertising or track the user on a website or multiple websites for similar marketing purposes.
